DRV8848PWP .

The DRV8848PWP is a dual H-bridge Motor Driver can be used to drive one or two DC motors, a bipolar stepper motor or other load. A simple PWM interface allows easy interfacing to controller circuits. The output block of each H-bridge driver consists of N-channel and P-channel power MOSFETs configured as full H-bridges to drive the motor windings. Each H-bridge includes circuitry to regulate the winding current using a fixed off-time chopping scheme. The DRV8848 is capable of driving up to 2A of current from each output or 4A of current in parallel mode (with proper heat sinking, at 12V and TA=25°C). A low-power sleep mode is provided, which shuts down internal circuitry to achieve very-low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin. Internal protection functions are provided for UVLO, OCP, short-circuit protection and over-temperature. Fault conditions are indicated by a nFAULT pin.

• Dual H-bridge motor driver
• Single/dual brushed DC
• PWM control interface
• High output current per H-bridge
• Low-current 3µA sleep mode
• VM under-voltage lockout (UVLO) protection
• Over-current Protection (OCP) protection
• Thermal shutdown (TSD) protection
• Fault condition indication pin (nFAULT) protection
• Green product and no Sb/Br

Toepassingen

Consumer Electronics, Motor Drive & Control

Waarschuwingen

This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.