LMH6503MT/NOPB

The LMH6503MT/NOPB is a wideband low power linear Variable Gain Amplifier for use with voltage controller filter. The DC coupled differential input voltage controlled gain stage followed by a high-speed current feedback op-amp which can directly drive a low impedance load. Gain adjustment range is more than 70dB for up to 10MHz. Maximum gain is set by external components and the gain can be reduced all the way to cut-off. Power consumption is 370mW with a speed of 135MHz. Output referred DC offset voltage is less than 350mV over the entire gain control voltage range. Device-to-device gain matching is within 0.7dB at maximum gain. Furthermore, gain at any VG is tested and the tolerance is ensured. The output current feedback op-amp allows high frequency large signals and can also drive heavy load current (75mA). Differential inputs allow common mode rejection in low level amplification or in applications where signals are carried over relatively long wires.

• 70dB Adjustment range (typical over temperature)
• ±0.7dB Gain matching (limit)
• 1800V/µs Slew rate
• 37mA Supply current (no load)
• ±75mA Linear output current
• ±3.2V Output voltage (RL=100Ω)
• 6.6nV/√Hz Input voltage noise
• 2.4pA/√Hz Input current noise
• -57dBc THD (20MHz, RL=100Ω, VO=2VPP)
• Green product and no Sb/Br

Toepassingen

Signal Processing