Heeft u meer nodig?
Hoeveelheid | |
---|---|
1+ | € 3,790 |
10+ | € 3,760 |
25+ | € 3,720 |
50+ | € 3,690 |
100+ | € 3,660 |
250+ | € 3,620 |
500+ | € 3,590 |
Productgegevens
Productoverzicht
The SN75175N is a quadruple differential Line Receiver with 3-state outputs. Designed to meet the requirements of ANSI standards EIA/TIA-422-B, RS-423-B and RS-485 and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10Mbs. The receiver has a common active-high enable. The receivers feature high input impedance, input hysteresis for increased noise immunity and input sensitivity of ±200mV over a common-mode input voltage range of ±12V. The SN75175 is designed for optimum performance when used with the quadruple differential line drivers. Designed for multipoint bus transmission on long bus lines in noisy environments.
- Meet ITU recommendations V.10, V.11, X.26 and X.27
- Common-mode input voltage range
- Low-power requirements
- Plug-in replacement
Toepassingen
Industrial, Power Management, Lighting
Technische specificaties
RS422 / RS485 Receiver
-
10Mbps
5.25V
16Pins
-
0°C
-
No SVHC (27-Jun-2018)
4Receivers
Half Duplex
4.75V
DIP
32
-
70°C
-
Wetgeving en milieu
Land waarin het laatste noemenswaardige fabricageproces is uitgevoerdLand van oorsprong:Malaysia
Land waarin het laatste noemenswaardige fabricageproces is uitgevoerd
RoHS
RoHS
Conformiteitsverklaring