ADF5902WCCPZ

ADF5902 is a 24 GHz transmitter (Tx) monolithic microwave integrated circuit (MMIC) with an on-chip, 24GHz voltage controlled oscillator (VCO). The VCO features a fractional-N frequency synthesizer with waveform generation capability with programmable grid array (PGA) and dual transmitter channels for radar systems. The on-chip, 24GHz VCO generates the 24GHz signal for the two transmitter channels and the local oscillator (LO) output. Each transmitter channel contains a power control circuit. There is also an on-chip temperature sensor. Control of all the on-chip registers is through a simple, 4-wire serial peripheral interface (SPI). It is used in application such as automotive radars, industrial radars, microwave radar sensors etc.

• 2-channel 24GHz power amplifier with 8dBm output
• 24GHz to 24.25GHz VCO (industrial, scientific, and medical (ISM) radio band)
• Single-ended outputs, 2-channel mixed outputs with mute function
• Programmable output power, LO output buffer
• RF frequency range is 24GHz to 24.25GHz, power control detector
• Auxiliary 8bit ADC, high and low speed FMCW ramp generation
• 25bit fixed modulus allows subhertz frequency resolution, PFD frequencies upto 110MHz
• Normalized phase noise floor is -222dBc/Hz typ, programmable charge pump currents
• ±5°C temperature sensor, 4-wire SPI, qualified for automotive application
• Operating temperature is -40°C to +105°C, package style is 32-lead LFCSP

Opmerkingen

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party