MAX32666EVKIT#

MAX32666EVKIT# is an evaluate kit that provides a platform for evaluating the capabilities of the MAX32665 and MAX32666 high-efficiency Arm® microcontrollers and audio DSP for wearable and hearable device applications.

• Bluetooth SMA connector with a 2.4GHz hinged whip antenna, 64MB XIP flash, 1MB XIP RAM
• 1.28in 128 x 128 monochrome TFT display, Stereo audio codec with line-in and line-out 3.5mm jacks
• Digital audio microphone, USB 2.0 micro B interface, USB 2.0 Micro B to serial UARTs
• Micro SD card interface
• Select GPIOs accessed through a 0.1in header
• Access to the 8 analogue inputs through a 0.1in header
• Arm® or SWD JTAG 20-Pin header, 1-wire RJ11 port, Arm® or SWD JTAG 20-pin header, 1-Wire RJ11 port
• Can be solely sourced by a coin cell battery, board power provided by either USB port
• Individual power measurement on all IC rails through jumpers, on-board 1.8V and 3.3V regulators
• Two general-purpose LEDs and two general-purpose pushbutton switches

Inhoud

MAX32666 EV kit containing a MAX32666 with a preprogrammed demo, Bluetooth® hinged whip antenna, MAX32625PICO debugger with cables, Two standard A to Micro B USB cables, Extra shunts.

Opmerkingen

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party