SER2915H-103KL
Power Inductor (SMD), 10 µH, 30 A, Shielded, 18 A, SER2900 Series
Heeft u meer nodig?
| Hoeveelheid | |
|---|---|
| 1+ | € 6,140 |
| 3+ | € 5,370 |
| 5+ | € 5,180 |
| 10+ | € 4,980 |
| 20+ | € 4,880 |
| 50+ | € 4,780 |
Productgegevens
Productoverzicht
The SER2915H-103KL is a surface mount shielded Power Inductor with ferrite core. This inductor features tin-silver over copper terminations and is resistance to soldering heat maximum three 40 seconds reflows at +260°C, parts cooled to room temperature between cycles. This inductor also features moisture sensitivity level (MSL) of 1, failures in time (FIT)/mean time between failures (MTBF) is 38 per billion hours/26,315,789 hours, calculated per Telcordia SR-332 and tested with pure water or alcohol only foe wash. Peak dc current at which the inductance drops the specified amount from its value without current and inductance measured at 500kHz, 0.1Vrms, 0ADC on an Agilent/HP 4284A LCR meter or equivalent.
- Extremely low DCR
- <gt/>100A Current handling
Technische specificaties
10µH
Shielded
27.9mm x 19.8mm x 15.36mm
-
± 10%
19.8mm
No SVHC (21-Jan-2025)
30A
18A
SER2900 Series
2050µohm
27.9mm
15.36mm
Technische documenten (1)
Alternatieven voor SER2915H-103KL
1 product gevonden
Aanverwante producten
1 product gevonden
Wetgeving en milieu
Land waarin het laatste noemenswaardige fabricageproces is uitgevoerdLand van oorsprong:China
Land waarin het laatste noemenswaardige fabricageproces is uitgevoerd
RoHS
RoHS
Conformiteitsverklaring