NSI45030AT1G
LED Driver, Constant Current, 0V to 45V input, 1 MHz Switch. Frequency, 30 mA out, SOD-123-2
Neem contact met mij op wanneer het product weer op voorraad is
| Hoeveelheid | |
|---|---|
| 3000+ | € 0,0936 |
| 9000+ | € 0,0926 |
Productgegevens
Productoverzicht
The NSI45030AT1G is a linear constant Current Regulator designed to provide a cost effective solution for regulating current in LEDs (similar to constant current diode, CCD). The constant current regulator is based on self-biased transistor (SBT) technology and regulates current over a wide voltage range. It is designed with a negative temperature coefficient to protect LEDs from thermal runaway at extreme voltages and currents. The constant current regulator turns on immediately and is at 25% of regulation with only 0.5V Vak. It requires no external components allowing it to be designed as a high or low side regulator.
- Simple, economical and robust device
- High or low side control, simple battery charge
- Reduce LED binning and therefore inventory
Toepassingen
Automotive, Industrial, Commercial
Technische specificaties
1Channels
-
2Pins
45V
-55°C
-
-
AEC-Q100
SOD-123
30mA
1MHz
30mA
SOD-123
0V
Surface Mount
150°C
AEC-Q100
No SVHC (27-Jun-2024)
Constant Current
1Outputs
-
Technische documenten (2)
Wetgeving en milieu
Land waarin het laatste noemenswaardige fabricageproces is uitgevoerdLand van oorsprong:China
Land waarin het laatste noemenswaardige fabricageproces is uitgevoerd
RoHS
RoHS
Conformiteitsverklaring