MK22FN1M0VLL12

The MK22FN1M0VLL12 is a 32-bit Kinetis K2x Microcontroller with USB control, based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 120MHz. The device incorporates 1MB internal flash, 128kB internal RAM, two 16-bit SAR A/D converter, one 12-bit D/A converter and 66 general-purpose I/O pins. This device also features communication interfaces like five UART modules, three SPI modules, three I2C modules and one I2S module.

• ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz
• FlexBus external bus interface
• Multiple low-power modes - low leakage wakeup unit
• Memory protection unit with multi-master protection
• 16-channel DMA controller
• External watchdog monitor and software watchdog
• Hardware CRC module
• 128-bit Unique identification (ID) number per chip
• Three analog comparators (CMP)
• Voltage reference
• USB Full-/low-speed On-the-Go controller
• USB device charger detect
• Controller area network (CAN) module
• Secure digital host controller (SDHC)
• Two 8-channel Flex-timers (PWM/motor control)
• Two 2-channel Flex-timers (PWM/quad decoder)
• Periodic interrupt timers and 16-bit Low-power timer
• Carrier modulator transmitter
• Real-time clock
• Programmable delay block
• 3 to 32MHz and 32kHz Crystal oscillator
• PLL, FLL and multiple internal oscillators

Toepassingen

Industrial, Automation & Process Control

Waarschuwingen

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.